Friday, October 30, 2015

Wednesday wildlife, Friday is buck day

I know it isn't Wednesday but I don't have a cabin update because I didn't take pictures last weekend. Rain and a run to Marshalltown cut into our work time but we did make a little progress.

A close up of a buck that is all legs:


He walked about 4 feet in front of the camera at 3:30am.

Rain is in the forecast for Saturday and Sunday looks to be a solo work day. I'm hoping to get more bracing put up. You can't have too much bracing.

Wednesday, October 28, 2015

Wednesday wildlife, another buck


A little late this week.

This buck was chasing several does on this late night as the camera captured them prancing in the moonlight.

Thursday, October 22, 2015

Cabin fever, our window to the world

At least one of them, facing the west and our hay field:


The boys and I were able to frame in the east and west windows but ran out of juice in the batteries before getting the door frame up. Last Saturday was the perfect day for work with temps in the mid 60's and not much of a breeze. A perfect day for putting up the tin which I wasn't ready for. Sunday was used for catching up on some maintenance at the homestead.

This coming weekend looks like it might rain which gives us the opportunity to burn brush, haul the remaining lumber and tin to the jobsite and get some other inside work done for other projects. If it doesn't rain, then we will frame in two more windows, if not a third, and the door frame.

It needs more bracing as well.

Wednesday, October 21, 2015

Wednesday wildlife, our pheasant sanctuary

We hear the roosters all day long while working and one time I flushed more than a dozen at one time. Others have said that the numbers are down this year, but not at our place. Here are some examples:





Monday, October 19, 2015

Final berry harvest

From one of our primocane blackberry plantings of this year:


Oh, if they were all this big. The frosts of last Saturday and Sunday will complete the harvest for this year.

Thursday, October 15, 2015

Three guys in sweatshirts

The sons and I going over some steps on bending metal without a brake.


I have been accused of not explaining the how and why of a particular task that I perform. In this case, I paused to explain how I bend metal for flashing. Right afterward I cursed myself for not bringing the proper clamps for the 2x4s and proceeded anyway. Production would have halted otherwise and we had enough problems with the mistakes I made.

Last Saturday was breezy with a little chill in the air and a heavy dew that lasted until late morning. The cottonwood leaves were beginning to fall onto our work area and we matted them down with our steps. We have only a few days left before the weather turns cold and a lot of work is left before I will be satisfied.

At the rate I'm going, we may not get the cabin properly sealed before winter. Let's hope this weekend is a productive one.

Wednesday, October 14, 2015

Tuesday, October 13, 2015

Cabin fever, frustrations galore but the roof is up

We put the insulation and metal up on the roof this weekend right over the top of a couple of purlins that were positioned incorrectly. After a few choice words in self-directed anger, I paused to figure out a solution.

Wasted time and additional money = a frustrating day.

I won't point out where I failed but I did to the clan that were there to help. And a couple other stupid mistakes for that day plus the mower acting up. The best part was cooking hot dogs on the grill at the end of the day Saturday.

But the roof is up and weeds were mowed.


You can see the roof and my idea of having it open for light through UV filtered plastic:


It's meant for light for vision rather than for heat with only a few inches that provides quite a bit of light. The picture doesn't give it justice since I almost blinded myself glancing up.


Next up are windows, the door and the trim and flashing.

Friday, October 9, 2015

Cabin fever, get that roof up

Last weekend was not as productive as I had hoped but we got the rafters and purlins up.

The roof peak:


Rafters:


Purlins:

 
Once we get the sheet metal on the roof, I think you will see what I'm trying to do. It's hard to visualize the final product when you only see the skeleton.

Of course, I mis-measured the south roof line the width of a 2x4. A couple of other things I didn't take into account caused me to have to add some additional blocking for the purlins. I didn't want close up shots of my mistakes but take my word for it. None of these were major mistakes that we would have to tear things apart but it took time that I wanted for more productivity.

On the docket for this weekend is to get insulation and metal on the roof, then get caught up on the mowing. I plan for the windows and the sheet metal walls next weekend with plenty of metal flashing. And more bracing. I would be very disappointed if the roof collapsed because of snow.

Wednesday, October 7, 2015

Wednesday wildlife. deer season is open




Not a great picture of a large buck. This last one pictured, I scared off last Wednesday evening. We stared at each other for a few minutes as he stood there and I stood about 100 yards to the right. He bounded up the hill when I moved a few steps closer.

Thursday, October 1, 2015

Cabin fever, it's about time we got back to it

The self-imposed hiatus on  the cabin build is over. We had unexpected medical bills that interrupted us. But we're going to try to get the shell up before winter sets in and seal it up as best we can to keep the little critters out.


I kept the tin on the base since spring to keep out the rain and besides a few critters that tried to make a nest, it was ready for us.

Facing north:


We built the sides on Saturday the 19th after a trudging through mud and stored them on the deck. A late start this past Saturday and we had the three sides up and leveled in a couple of hours. (We are amateurs, by the way).


Nestled among the small cottonwoods this will be the doorway (on the south) and with the four sides up, it seems smaller somehow. With it only 12 x 12, of course it's small but it should be big enough for a bed, storage, a small stove for heat and a commode. At least according to the plans that have been scribbled down and in my head.

Our biggest obstacle, besides the financing, has been keeping a charge in the batteries for our power tools. For our first shed, the four batteries gave me power to run nearly all day but that was four years ago. I make most cuts with a hand saw but with two of us running screwdrivers and with using the power saw when needed, the batteries aren't lasting quite as long. It may be time for an upgrade.

This calls for more bracing:


All building projects have lumber that have been cut off and I never let that go to waste. With a few extra screws I shore up corners, joists, rafters, etc. A neighbor commented that I used a lot of wood when we built the small shed in our first year at the acreage. It's withstood four major storms including one last spring that took out a machine shed to the west of us. Although on skids, this one will be solid as well. Number One son remarked that a storm might roll it down to the creek but it won't break apart.

That's my intention.

We only had Saturday to work last weekend and finished with the walls and bracing. Our intention is to take all day next Saturday and then Sunday afternoon for a good push while the weather is good. Let's see if I can get the roof on and walls put up and no surprise financial obligations get in the way.